Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
old ND tailpiece
”
RELATED FAQS
Question
Answer
What is the part number for a B562 tailpiece?
Resolution:
Tailpieces Description Part Number Door Thickness B562P (Classic Non-Modular) B600-045 1 3/8" - 1 3/4" B600-046 >1 3/4" - 2 1/4" B562P (Everest/Primus, Class...:
How long is the ND tailpiece for a thick door?
Resolution:
Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:
What are the part numbers for the SFIC driver and spacer used on the ND series locks?
Resolution:
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer:
When ordering the ND lock less cylinder will it come with a tailpiece?
Resolution:
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.:
What is the part number for a key in lever tailpiece for the ND lock?
Resolution:
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the t...:
Did the H-Series deadbolt and linkage change?
Resolution:
As of May 23, 2011 the Schlage H-Series is assembled with the Schlage B500-Series deadbolt and a new linkage. If the deadbolt is being replaced for a lock manufactured prior to May 23rd, 2011...:
What is the length of a Schlage rim cylinder?
Resolution:
The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:
I am unable to remove my key from a B600 B700 B800 deadbolt.
Resolution:
This is usually caused because the wrong tailpiece is being used on non-IC cylinders or the incorrect driver for IC options. Use the below descriptions to identify which they need.NON-IC: There are...: