Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
OCCUPIED INDICATOR FOR TUBULAR INTERCONNECTED LOCK
”
RELATED FAQS
Question
Answer
How thick is the 09-611 indicator?
Resolution:
The pricebook suggests (for a 1-3/4" door) using a 1-3/8" cylinder when installing with an 09-611 occupancy indicator.:
What does the hotel indicator look like for the A, AL, D, and ND?
Resolution:
The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed. When this pin is ...:
What is the L9496 function?
Resolution:
L9496 is a Privacy mortise lock with “Occupied” Indicator. Knob/lever retracts latchbolt from either side. Deadbolt thrown or retracted by key outside (retraction by key required in the event ...:
L9496
Resolution:
Privacy lock with "Occupied" indicator - Latchbolt is operated by knob/lever on either side. Deadbolt is thrown or retracted by key outside (retraction by key required in the event of an emergency)...:
L496
Resolution:
The L496 is a Small mortise deadbolt lock:Deadbolt lock with "occupied" indicator - Deadbolt is operated by key outside or thumbturn inside. Furnished with 09-611 per L583-375 indicator. When ...:
What is a Grade 2 Lock?
Resolution:
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI...:
Does Schlage or Falcon have an indicator deadbolt?
Resolution:
Both the Schlage B571 and Falcon D271 are occupancy indicator deadbolts that read "IN USE" and "VACANT". The B571 is shown below but the indicator will be identical to the D271 (see Figu...:
What is the CO-220?
Resolution:
The Schlage CO-220 is standalone classroom lock down solution with remote fob and visual indicator which allows immediate local lock down by simply pushing the button on the remote fob from anywher...: