Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ no lip strikes ”

RELATED FAQS

Question
Answer
Is there a flat lip option for the ND series?
There are two flat lip strike options: Specify XQ02-309 for a 10-013 strike - specify 7/8" Specify XQ07-351 for a 10-025 strike - specify 7/8"
What can be ordered if a no lip strike is required for the L9000?
The L-Series standard strike is the 10-072 and the available lip lengths are listed below.  7/8"  (Flat or straight lip) 1" 1 3/16" (Standard for 1 3/4" doors)  1 1/2" 1 3/4" 2" over 2" up...
What is the part number for the 6210 spring and lip replacement package?
You can replace the 6210 spring and lip, part number 050940-00.
How do I calculate lip length?
Lip length refers to the dimension from the centerline of the strike screw holes to the edge of the lip.  See the attached as lip length depends on door handing and thickness, Extended Lip Str...
Lip length is calculated using the following formulas:
What electric strike will work with mortise lock and aluminum 1 1/2" faced frame?
Von Duprin doesn't offer any electric strike to fit into 1 1/2" aluminum/metal faced frame.  Minimum requirement to install 6211/6211AL is 1 15/32" mortise depth.
What is the amount of pre-load force allowed for the 6300 electric strike before the strike will no longer release and operate properly.
Zero is the amount of preload force for the 600 and 6300 electric strike.