Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nl-op instalation manual ”

RELATED FAQS

Resolution: You would have to order the device as 88NL less trim, the device will be shipped as an 88EO. The EO device has an NL cam to accept a rim cylinder tailpiece. :

How to order a 25-C device with the NL-OP trim function?

Resolution: Device would be ordered as a 25C-C as of June 2012.The C-C suffix designates the 25C will come with the 718C-C cylinder control which uses a 1-¼" mortise with a narrow straight cam:

Does Von Duprin offer an NL or NL-OP function with the 8827 exit device?

Resolution: This option is not available as there is no NL cam to directly drive the rods and using a key to lift the heavy stainless, brass or bronze rods would damage the key. :

Can a 24-R, 24-V, 25-R, or 25-V device use just a cylinder on the pull side for NL-OP function?

Resolution: This is possible. A rim cylinder with cylinder anchor plate is used (anchor plate provided with rim cylinder package). No other special components are required. Order device as NL-OP.&...:

Do I have to use the 388 to get NL-OP on a 33A/35A series device?

Resolution: The 388 Cylinder Control is required for the NL-OP function on a 33A/35A series exit devices.The 110NL is used on 22 and 98/99 series exit devices not 33/35A series devices.The 33A/35A de...:

Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?

Resolution: For night latch function with pull by others, the 98/99 series mortise exit device should be ordered as NL less trim, e.g., 9875NL-L/TRIM. We will furnish a device only, and the mortise cyl...: