Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
NDE push button
”
RELATED FAQS
Question
Answer
Why does the ND40 stay locked after egress?
Resolution:
There is potential for ND40/ND44's manufactured around March 2011 to remain locked after egress, or after the latch is depressed. There was an issue with the keycam that created a bind when l...:
Schlage NDEB - Special Functions Now Available
Resolution:
The NDEB now supports these functions, new to the NDE series, via the Interior Push Button Storeroom Lockset is normally secure with outside lever disengaged. ...:
AL-Series Plunger Assembly Instructions
Resolution:
Changing the plunger assembly on the AL-Series requires disassembling the chassis. Refer to Plunger Assembly Instructions for guidance.:
How to change switches on a 8200 Console to maintained or momentary?
Resolution:
To replace the pushbuttons, remove the switch connector from the console main board Then press the pushbutton from the inside of the panel face out through the hole. There will be some resist...:
Schlage AD-Series - Replacement Inside Push Button (IPB)
Resolution:
The white-colored pushbutton on the main board is replaceable by ordering: 47269170 This component can be ordered through an authorized Schlage Electronics distributor. :
D73 locking issues with push button.
Resolution:
A design change occurred in 2001 to address a locking/unlocking issue with the discontinued D73 lever locks. This included modifying the cam and plug, spindle and using a different plung...: