Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd series strike ”

Resolution: Schlage offers the 10-042 Electric strike, 1 1/4" x 4 7/8", 606 and 626 finish only. Related solution: What are the current and voltage requirements of ...:

Is there a flat lip option for the ND series?

Resolution: There are two flat lip strike options: Specify XQ02-309 for a 10-013 strike - specify 7/8" Specify XQ07-351 for a 10-025 strike - specify 7/8" :

Which electric strike do I use for cylindrical locks used in a single door?

Resolution: The 6211 would be the most common electric strike to be used with cylindrical locks on a single door application. Check the template to confirm compatibility with specific cylindrical lock model n...:

What type of switch is used for the RX and latch monitoring options for the ND and L locks?

Resolution: The ND-Series RX, the L-Series RX and latch monitoring switches are Form C - Single Pole Double Throw (also known as SPDT).:

What height should a lock or deadbolt be installed?

Resolution: According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ nd series strike ”

RELATED FAQS