nd series part number

RELATED FAQS

Question
Answer
Schlage offers the 10-042 Electric strike, 1 1/4" x 4 7/8", 606 and 626 finish only. Related solution: What are the current and voltage requirements of ...
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig.  When the jig changed to...
ND -series locks manufactured on or after January 30, 2017 use the following spring cages:Outside - N523-218 - For ALL cylinder options except for JD-YA6, JD-YA7 and JD-MEDInside - N523-222 -...
ND-series locks manufactured before January 30, 2017 used the following spring cages:
The new motor driven ND electrified locks shipped after March 14, 2016 do not require a solenoid. The Schlage ND-Series electrified locks shipped prior to March 14, 2016 would have used a...
03-042 is the part number for the inside or outside rose.
The ND-Series FSIC driver is part number N523-127.
ND-Series Cylinder Reference Table Function Door Thickness Cylinder Mechanism Complete Cylinder Non-Hotel Functions Standard Conventional 23-065 Primus 20-765 Pri...
There are several part numbers available: Part Number Contents 09-774 SFIC driver & Spacer N523-091 SFIC driver D500-000 Spacer
NDE Replacement cartons are available under part number P517-006 N N SL AD and CO use the same boxes, they just differ by chassis type:  Cylindrical is available as part numb...
The ND40 outside emergency button and the ND44 outside emergency turn button can disengage from the lever and fall out when they are not assembled properly.Click here for emergency button...
 If the button and plunger or emergency cylinder are damaged they can be ordered separately.  Part numbers are below.  Emergency Button and Plunger (ND40) - N123-034Em...
The default backset is 2 3/4" and the latch faceplate dimensions are 1 1/8" x 2 1/4". The latch supplied is the 13-047 deadlatch and 13-048 springlatch.
See here for standard ND Keycam part numbers and what functions they belong to. See here  for special ND Keycam part numbers and what functions they belong to.  ...
A and AL product: Must use the 2 3/8" backset with the 41-005 extension link D Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...
Only the Schlage D-knob and ND products are available with an extra long backset.  The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to b...
Latches are sold separately, see current Pricebook for part numbers.
The part numbers are: N123-020 Mounting, all functions except ND170, Contains the following: (4) C603-897 (2) C603-256 (2) N523-021 (1) M504-271 N123-040 Mounting, ND170: Contains ...
SCHLAGE locks are available with the following backsets: Lock Series Lock Type                 ...
ND-series locks manufactured on or after January 30, 2017 use a different levers for cylinders and push/push-to-turn buttons.03-230 - Closed03-231 - Privacy & Cylinder- Schlage KIL (P,L)03-232 ...
ND-series locks manufactured prior to January 30, 2017:03-030 - Closed03-031 - Privacy, Cylinder- Schlage KIL (P,L) & Push or Push & Turn Button03-032 - Schlage FSIC 03- 000 - Schlage ...
On ND-series locks manufactured on or after January 30, 2017:The ND FSIC lever part number is 03-232.  You will need to specify the design and finish.
On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032.  
As of June 28th 2018, the ND chassis can be ordered by one single part number, see here.  
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the t...
ND levers and roses are available to be ordered as separate parts with the antimicrobial (AM) finish.
Conversion kits are available to convert many popular functions.Conversion kits manufactured on or after January 30, 2017 will have the new enhanced ND spring cage, lever, plunger and buttonCo...
For all available ND Series Conversion Kit part numbers, click here.