Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ND series lockset ”

RELATED FAQS

Question
Answer
How does the ND82 operate?
ND82PD (ANSI F87) Institution Lock  Both levers fixed. Entrance by key in either lever.
Can you explain the ND53 function?
ND53PD (ANSI F109) Entrance Lock  Turn/push-button locking; pushing and turning button locks outside lever, requiring use of key until button is manually unlocked. Push-button locking; pushing bu...
What type of switch is used for the RX and latch monitoring options for the ND and L locks?
The ND-Series RX,  the L-Series RX and latch monitoring switches are Form C - Single Pole Double Throw (also known as SPDT).
What is the warranty for Schlage commercial mechanical locks?
Warranty Statement   3 Year Limited Mechanical Warranty and 1-Year Limited Electromechanical Warranty - Additional warranties listed below The provisions of these limited warr...
What height should a lock or deadbolt be installed?
According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...
Is there a tool to drill the thru bolt holes on cylindrical locks?
Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig.  When the jig changed to...