Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
nd lock install manual
”
RELATED FAQS
Question
Answer
What is this plastic clip on the ND chassis?
Resolution:
On August 15, 2012 Schlage began shipping ND-Series locks with a hassle free "clip" to aid with the installation of the anti-rotation plate. This feature has been added to the hub to keep the...:
Will a Medeco key-in-lever cylinder fit into an ND lock?
Resolution:
Medeco does offer a key-in-lever cylinder to fit the Schlage ND. You will need to contact Medeco for the cylinder Specify a key-in-lever cylinder to fit the Schlage ND lo...:
How can I tell if I have a new ND lock or the previous design?
Resolution:
ND locks shipping on or after January 30, 2017 will look very similar when assembled to their predecessor that shipped prior to that date. There are several ways to distinguish the old versus the n...:
How do I assemble my ND75 / ND95 lock chassis?
Resolution:
The Schlage ND75 and ND95 locks require the chassis to be assembled and timed correctly for operation. If the chassis has to be disassembled for any reason please refer to the Asse...:
What other locks can the blue lever removal tool 24002693 be used with?
Resolution:
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:
Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?
Resolution:
Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...:
What are the part numbers for the ND lock spring cages?
Resolution:
ND-series locks manufactured before January 30, 2017 used the following spring cages::