Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
ND lock cycle test
”
RELATED FAQS
Question
Answer
What are cycle testing counts for exit devices?
Resolution:
ANSI grade one cycle test is 500,000, grade two is 250,000 and grade three is 100,000.:
CX will not arm. Red light on solid waits 10 sec, light goes out and cycle repeats
Resolution:
Inadequate power or wrong gauge wire is used. The inrush current demand by CX will overload and shutdown the power supply if undersized. You must use the Von Duprin PS873 or...:
What BHMA Grade is the Falcon 25 Series exit device?
Resolution:
Falcon 25 series devices are ANSI/BHMA A156.3 Standard for Grade 1 device.References:Falcon 24/25 Series Heavy Duty Touch Bar Exit DeviceCertified Products Directory | BHMA:
692 Smart Bar trouble shooting
Resolution:
Verify power input lines have 12 or 24 volts DC. Power up the 692, several self test beeps should occur and the internal relay will cycle then it will become silent In normal operation breaking...: