Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ ND lip length for extended door ”

RELATED FAQS

Resolution: The 3130SE, 4040SE, and the 4040SEH use the same length track. The 4040SEL track is longer.The SE/SEH (-3038) track is 22-3/4" long. It functions as a single point hold open, and can be set to hold...:

What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?

Resolution: A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.:

What cylinder is required for the 360L from Von Duprin?

Resolution: A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:

What are the Rod and Shoe lengths for 4000 and 1000 series closers?

Resolution: STANDARD ROD AND SHOE: 4020, 4031, 1460, 1260, 4640, 4820 is: 8 3/8” (obsolete product 1520, 1370, 1070 had same length)LONG ROD AND SHOE: 4020, 4031, 1460, 1260, 4640, 4820 is: 12 3/8” (obso...:

What lengths of thru bolts are available from LCN?

Resolution: The thru bolt for 1-3/4" door is 1-23/32" in overall length. The thru bolt for 1-5/8" door is 1-19/32" in overall length. The thru bolt for 1-3/8" door i...:

How long is the ND tailpiece for a thick door?

Resolution: Schlage ND-Series tailpieces for extended doors are available by only two means, but are not available to order separately. If an extended tailpiece is needed, then a complete lock ...:

Can an ND lock with SFIC cores be extended to fit a 3" extended outside door?

Resolution: ND locks can be extended up to 6" Extended Outside. :