Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ NARROWEST WIDTH CLOSER ”

RELATED FAQS

What is the narrowest door a 4010 can be mounted on?

Resolution: When templated for 140° the 4010 will fit on a 16-1/2" door leaf MINIMUM.:

What is the narrowest door a 4040 pull side will mount on?

Resolution: 14" door leaf is the narrowest with standard template.:

What are Overhead Concealed door closer?

Resolution: Overhead Concealed door closers are used to provide a more aesthetic look to the opening. Concealed in either the frame or the door Offer the ability to be adjusted to maintain...:

What are the minimum header lengths for a Senior Swing?

Resolution: The minimum header lengths for a Senior Swing are: Concealed 2810 Series: 2811 single door (offset pivot or butt hinge) -- 33". 2811 single door with stop (center pivot...:

Can a 4110 closer be mounted on a 24 inch door?

Resolution: Standard templating will allow a 4110 closer to be mounted on 24" wide door.:

What can be done for a door that will not close against wind pressure?

Resolution: To correctly answer this question, we need to know how much more force is required to get the door closed. They could try turning the Rod & Shoe over (short side of shoe towards the hinge), or they...:

Which Falcon SC closer is the closest match to a LCN 4040?

Resolution: The Falcon SC 71:

What is the maximum size of a welded elevation frame?

Resolution: The following size limitations per frame unit, are in enforced for welded elevation frames shipped from the factory. These limitations are in place due to the physical size of shipping tr...:

What is clear opening width?

Resolution: Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb. &nbs...: