Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ NARROWEST DOOR WIDTH CLOSER ”

RELATED FAQS

Question
Answer
What is the narrowest door a 4010 can be mounted on?
When templated for 140° the 4010 will fit on a 16-1/2" door leaf MINIMUM.
What is the narrowest door a 4040 pull side will mount on?
14" door leaf is the narrowest with standard template.
What are Overhead Concealed door closer?
Overhead Concealed door closers are used to provide a more aesthetic look to the opening.  Concealed in either the frame or the door Offer the ability to be adjusted to maintain control o...
What are the minimum header lengths for a Senior Swing?
The minimum header lengths for a Senior Swing are: Concealed 2810 Series: 2811 single door (offset pivot or butt hinge) -- 33". 2811 single door with stop (center pivot) -- 36". 285...
Can a 4110 closer be mounted on a 24 inch door?
Standard templating will allow a 4110 closer to be mounted on 24" wide door.
What can be done for a door that will not close against wind pressure?
To correctly answer this question, we need to know how much more force is required to get the door closed. They could try turning the Rod & Shoe over (short side of shoe towards the hinge), or they...
What is clear opening width?
Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb.          &nbs...
What is the ANSI A115.1 Government 86 Door Prep for the L9000 lock?
See image, ANSI A115.1 Mortise Lock PrepThis door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.  Spacer kits are...
What is a 62A shoe used for?
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.