Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ N ESCUTCHEON THROUGH BOLTS ”

RELATED FAQS

Question
Answer
Can L9000 locks be ordered for extended or thick doors?
The L9000 lock can be ordered for doors greater than 1 3/4" thick.  The allowable door thickness is dependent on the L lock function and how the lock is extended.  All locks for exte...
What finish will the strike and latch be if ordered with a split finish?
The door handing determines the finish of the latch and strike. Left reverse and right reverse doors default to outside trim Left and right hand doors default to inside trim If lever an...
Are the danmark levers available in escutcheon trim?
The Danmark levers were available in rose trim only.
Do we make a blank trim plate to replace an existing trim?
We have several blank trims listed in the price book to cover existing trim prep in door.  DEVICE EO TRIM   22  230EO  88  880EO   98/99  990EO or 996EO*  33A/35A Rim, 33/3...
What is the part number for the blank escutcheon trim that matches the 996L escutcheon?
The 996EO trim is just the plate without the lever and cylinder hole
What are the part numbers for the mounting posts and screws for an L9000 lock?
 Mounting Posts   Part Number  Door Thickness  L583-211  1 3/8"  L583-212  1 3/4" - See note section on SL1 trim  L583-213  2...
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference: