Allegion order status and tracking information is only available to Authorized
Distributor Partners.
Authorized
Allegion Distributor Partners can view order forms and ordering
information ...
FastTrack is a quick ship stock program which includes targeted
Builders Hardware SKUs offered by Allegion Distributor Partners. FastTrack order
forms and supporting information is available only t...
Allegion Employees can access the distributors’ “My Allegion
Portal” thru The Frontline Home Page:
Click on “My Allegion
Distributor Portal” located in the navigation menu on the left si...
You must have at least one 2.0 (B version) Engage device commissioned to that Engage site to have access to the Mobile Credential field.
NDEB or LEB or CTEB.
Steelcraft offers two optional types of reinforcements for open section header to be installed in distributor shop or in the field:
Full profile sleeve; is a 14 gauge, 16" long part to fit the p...
A bent back strike is a strike where during the forming process, all of the material where the openings for the latch and/or deadbolt was not removed leaving a "tab" of material which is the...
The purpose of a bent tab is so that if you experience door rattle, the tabs can be bent back slightly (toward the open area) so that the tab holds the door tightly against the doorstop/m...
Schlage and Falcon offer several bent tab strikes for use with their locks. Below is a list of bent tab strikes and the lock series they can be used with.
We do not offer mounting tabs for 6000 series electric strikes. However, the mounting tabs found in PKGMTG.1004 for the 5100 series mounting package could be used. The frame or d...