My schlage sense deadbolt will not access my wifi network. Why?

RELATED FAQS

Question
Answer
First, perform a Factory Default Reset  Next, close the app, turn off Bluetooth (swipe up from the bottom of the screen, tap the Bluetooth icon). Turn Bluetooth back on.  Reop...
Press and hold the Wi-Fi name and click on the “forget” notation.
Partner Solution: Integrated Access Control Solution with AD-300 Hardwired, AD-400 Wireless Locks and Avigilon RedCloud Access Control System.See the download cut sheet at:Avigilon Red Cloud&n...
Ensure when pressing and holding the Schlage logo it is the one located above the numbers 1,2 and 3 on the keypad and NOT the inside Schlage alarm button.
We don't use secure OSDP, the controller will need to be set to open and then they should be able to see the data.
Place any new orders per the following table ...
 Mortise Deadbolt Locks  Discontinued  Replace With  CO200MD  70-Classroom/Storeroom  40-Privacy  CO250MD  70-Classroom/Storeroom  40-Privacy  AD200MD  70-Classroom/Storeroo...
* NOTE: the AD300/400 devices simply communicate the change in Deadbolt Position status to the Host software.  The software then decides what action should or should not be taken at the device.