Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ multi point closer ”

RELATED FAQS

Resolution: Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:

What is the LCN fluid - "Liquid X" - temperature range?

Resolution: The LCN closer fluid "Liquid X" will perform without variation between: -30° F to +120° F - for manual closers. +35° F to +120° F - for electrical closers and a...:

Why does the arm of my 4110 EDA touch the door when it is closed?

Resolution: If the closer arm is touching the door, it is because the arm or the closer body is not templated correctly. Confirm dimensions are taken from the proper location and make corrections if needed. :

In what direction should the hold open nut be pointing for a 4041 H closer, up or down?

Resolution: Make sure that the hold open nut is not on upside down. The orientation of the hold open nut depends on the mounting. On a Top Jamb "Push Side" mount, the hold open nut would poi...:

What does AVB mean in a closer and which closers are available with this option?

Resolution: AVB stands for Advanced Variable Backcheck. It is a cylinder option when ordering, that allows backcheck to start at about 45 degrees instead of the normal 75 degrees. 4110, 4210...:

What is the LM9000 mortise lock?

Resolution: The Schlage LM9000 Multipoint Solution was a three-point locking assembly that was UL approved to FEMA 361 and FEMA 320 guidelines for outswing doors, and met ANSI ICC 500 for tornad...:

Can the LM9000 multi lock series be used in standard openings?

Resolution: Specify either an L or B doors for use with the LM9000 or LMV9000 Specify the F frame for use with the LM9000 or LMV9000 Order the lock from Schlage as you would normally The concealed rods...: