Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Mounting locAtion fire bolt ”

Resolution: Use a normally closed fire alarm as the input to the power supply option board (PS873-2 or PS914-2RS), this will hold the latch retracted. During a fire alarm, the contact will open, dropping...:

Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?

Resolution: Installation should be 6" from bottom of the door. See attached templates as reference. T-5494 for HM Doors W-5494 for Wood Doors:

At what degree will the AFL (Auxiliary Fire Latch) bolt release?

Resolution: 1400 degrees which is approximately 20 minutes after the fire starts.:

Is there a chart that shows which sex bolts are required for mounting the Von Duprin and Falcon/Monarch exit devices?

Resolution: There is not a chart that shows which sex bolts are required for Falcon/Monarch exit devices. However, this auxiliary catalog list those for Von Duprin: catalog.:

Does Von Duprin have a fire latch that will go into the floor?

Resolution: Auxiliary fire latch is tested only from door to door latching by Von Duprin. Some door manufacturers have tested our devices LBR and use additional fire latches to pass the fire test. Contact the ...:

What is the part number for the former F588 from Monarch?

Resolution: The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Mounting locAtion fire bolt ”

RELATED FAQS