Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
mortise and bored lock
”
RELATED FAQS
Question
Answer
What is the Multi Point LM9300 Series?
Resolution:
MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks...:
How to install an L9000 mortise lock less outside rose trim?
Resolution:
The L283-150 is a modified mounting plate to allow a user to only install trim on the inside of the L9000. For installation and door prep requirements, see the install sheet. Add...:
How to build an L-Series chassis.
Resolution:
This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:
What is the ME9453?
Resolution:
At one time we offered a 9453 function in several different lever, knob and grip handleset designs. A wide variety of trim offerings were available. The mortise lockcase was a smaller version of th...:
What cam to use for a modular cylinder in Sargent mortise lock?
Resolution:
The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:
What template to use for the Falcon MA mortise lock?
Resolution:
The following templates are for the MA lock. Use the matrix in each template for the specific function. See here for Sectional trim . See here for Escutcheon trim. :
What is a Grade 2 Lock?
Resolution:
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI...:
Is there a round corner armor front for the L series mortise lock?
Resolution:
The L series armor fronts are only available with square corners. :
What is a Grade 1 Lock?
Resolution:
Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 8...:
Is the L-Series mortise lock UL rated?
Resolution:
UL Listed for 3-hour fire door (except L9076 and L9077):
How does the LM9000 LMV9000 product ship?
Resolution:
The LM9000 mortise lock, door with pre-assembled vertical rods, and frame all ship separately. The soffit latch, bottom strike, and latch release will ship with the mortise lock, not the...: