Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ mortice deadlock and cylinder ”

RELATED FAQS

Resolution: Cylinder deadlock - Deadbolt thrown or retracted by key only. Blank plate inside. Bolt automatically deadlocks when fully thrown.:

D231

Resolution: Double cylinder deadlock - Deadbolt thrown or retracted by key from either side. Bolt automatically deadlocks when fully thrown.:

D241

Resolution: Single cylinder deadlock with turn - Deadbolt thrown or retracted by key or by turn. Bolt automatically deadlocks when fully thrown.:

What is a deadbolt?

Resolution: Deadbolt Locks (Deadlocks): a lock with a bolt which requires a deliberate action to extend and which resists end pressure in the unlocking direction when fully extended Medium, high to extra he...:

What is the tailpiece and driver part number for the 20-057?

Resolution: The B220-001 is an FSIC rim tailpiece and driver.:

What is the Falcon cam designation for use on 25 series trims?

Resolution: For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam :

What are the part numbers for the ND lock spring cages?

Resolution: ND-series locks manufactured before January 30, 2017 used the following spring cages::

How do you specify cylinder dogging for mortise cylinders?

Resolution: When ordering dogging with cylinder; specify complete cylinder with appropriate option below: XQ11-949 for all conventional cylinders XQ11-948 for full size and small ...:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

What is a modular cylinder?

Resolution: Click here for the Schlage Modular Cylinder Marketing Sell Sheet for information on the modular cylinder.:

What is the L9066 XL11-897?

Resolution: L9066 x XL11-897 Storeroom Lock Key in either cylinder locks or unlocks both levers. When locked, latchbolt retracted by key either side. Specify per XL11-897 with the lock function when or...:

What is the part number for the blocking ring for use without compression ring?

Resolution: The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).:

Does Schlage offer a cam that will work with a Yale mortise lock?

Resolution: Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam. Schlage Cams for Yale 2160 Part Number Description B520-7...:

Is a mortise cylinder coin turn offered?

Resolution: Coin turn will need to be on a separate line item, specify 09-487 x length (118, 114, 138).This cylinder coin turn is non-handed so it can rotate freely in both directions.:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

What cylinder length do you use for escutcheon trim for the L series mortise lock?

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

How do I change the hand of a hotel cylinder?

Resolution: HANDINGA stop ring is installed on the right side for right hand operation and on the left side for left hand operation. Right hand shown below.: