MONARCH PARTS INTERCHANGABLE?

RELATED FAQS

Question
Answer
The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.
PCB only for the Alarm Kits prior to June 11th, 2012 is part #650335 and was used in the older 17 & 18 devices, 19, & pre June 2012 24/25's.
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.
The Falcon Monarch 18-R-EO device can be converted in the field to the 18-R-L by purchasing three parts. The following items are required to convert the device.  812L or 816L lever tri...
See the installation instructions 718 for -C devices.
Templates for current 718 series trim can also be found on Falcon website
 The Falcon Monarch 718C and the 718NL trims can be used on the 25-C exit device.  The 718C trim is listed in the Price Book for the 25 series  The instructions attached will give dimensional i...
The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.
Schlage does offer rabbetted latch and strike kit: Part number, 39-030, for cylindrical locks and deadbolts.  Part number, 10-075, for the L9000 mortise locks. Monarch does not offer rabbette...