Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Monarch device trim ”

Resolution: Falcon Monarch XX series trims will work with Monarch 18 series exit devices.:

Where is the template for the 718 trims made after 2/28/2011 for Falcon/Monarch concealed vertical rod devices?

Resolution: Templates for current 718 series trim can also be found on Falcon website:

Can the Falcon Monarch 718C or 718NL trim be used with the 25-C exit device?

Resolution: The Falcon Monarch 718C and the 718NL trims can be used on the 25-C exit device. The 718C trim is listed in the Price Book for the 25 series The instructions attache...:

Is the Athena trim from Falcon Monarch the same as Standard trim?

Resolution: Yes, "Standard" was the old name for the sectional pull trim for the 18/XX devices and is now called Athena. The trim is the same, only a name change.:

Can we still supply the 812 L trim for the Monarch 18?

Resolution: Allegion stopped manufacturing he 812L trims when the Falcon/Monarch XX Series crossbar devices were discontinued in 2019.The 812L trims had also been used on the Monarch 18 Series pushpad devices ...:

Can a 712L or 912L be converted to L-NL in the field?

Resolution: The current 712L/912L (after 2/28/2011) can be field converted by purchasing the NL Spring part #600339 and following the L to NL function change instructions.:

Can the EL solenoid be replaced in the former Monarch 17/18 devices?

Resolution: It can but the solenoid will need to be purchased through New England Door Closer as the factory discontinued the old ELR solenoid (part #650092-000) in June 2010.:

What is the part number for the EAK PCB only for Monarch Falcon devices?

Resolution: This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.:

What is the part number for the former F588 from Monarch?

Resolution: The top latch for a Fire rated surface vertical rod device is part #650375-00 which replaced the old part #F588.:

What replaced the Falcon Monarch 17 & 18 devices?

Resolution: Falcon Monarch 24 series exit devices replaced the 17 Series exit devices. Falcon Monarch 25 series exit devices replaced the 18 Series exit devices.:

Are 1 piece top rods available for a 24V or 25V device?

Resolution: As of August 3rd, 2011 this is no longer an option.:

Is there a chart that shows which sex bolts are required for mounting the Von Duprin and Falcon/Monarch exit devices?

Resolution: There is not a chart that shows which sex bolts are required for Falcon/Monarch exit devices. However, this auxiliary catalog list those for Von Duprin: catalog.:

Can the Von Duprin RX Switch be installed on an existing Falcon Monarch 19?

Resolution: The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.:

Are trims for the Falcon / Monarch 18 series still offered?

Resolution: Allegion no longer provides trims for the 18 Series. The Falcon 25 Series trims are not compatible with the old Monarch 18 Series exit devices.:

What cylinder is used for the Falcon 510L and 510L-NL trim?

Resolution: The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:

What is the Falcon cam designation for use on 25 series trims?

Resolution: For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam :

What would the 904H stand for on a Falcon Monarch exit device?

Resolution: The "904H" is a UL Panic label that is placed on the centercase of the Falcon/Monarch Panic device.:

Has the Monarch 19 ever had electric latch retraction?

Resolution: Electric Latch Retraction(ELR) option for the 19 Series was discontinued in December of 2006.:

Where are hardware templates?

Resolution: All the templates can be found at us.allegion.com Please click here :

What is the dogging hex key size on the Falcon Monarch devices?

Resolution: The hex dogging key size for all Falcon-Monarch exit devices is 7/32".:

What does BA mean when ordering a Monarch device?

Resolution: "BA" stands for basic assembly or what is now referred to as Exit Only(EO):

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Monarch device trim ”

RELATED FAQS