Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ model number location ”

Resolution: To determine the SC series, measure center to center on the closer body bolt hole mounting pattern and an overall description of the closer and arm. SC91 -- 6-3/8" x 3/4" -- unique arm SC93 -- 9-1...:

How do you identify the model number and date code of an LCN cast iron hydraulic closer?

Resolution: The date is a 4 digit #. The first 2 numbers indicate the week it was made, and the last 2 numbers indicate what year it was made. On most surface mounted closers, the model #, date code, ...:

Does the PD listed with lock model number mean anything?

Resolution: Schlage and Falcon use the P cylinder suffix to designate conventional key-in-lever (KIL) 6 pin cylinder. The D means that the lock will have a deadlatch.:

What are the model numbers for the new Schlage and XceedID wall mounted credential readers?

Resolution: The Legacy wall mounted readers are replaced as shown in the table below: The MTMS15 and MTMSK15 did not have any prior models that it replaced.:

Where is the cross reference list for PS800 to PS900 series power supplies?

Resolution: Von Duprin PS914-4RL power supply replaces the PS873-4TD.:

What is a 320G door closer?

Resolution: The "320G" is the # on a UL sticker attached to the arm of most LCN door closers, and is not a door closer model number. The "320G" means that the arm is not a mechanical hold open device and OK t...:

What is the model number for the Ives door edge pull?

Resolution: The sliding door edge pull is part number 230.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ model number location ”

RELATED FAQS