Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ minimum door width fire rated ”

RELATED FAQS

Question
Answer
What is the minimum clear opening width required by ADA on a single door?
The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...
Can 5100 electric strikebe used on fire rated door?
The Von Duprin 5100 electric strike is not for fire rated applications.
Can a Senior Swing 9550 be mounted on an unequal pair of doors?
"PUSH SIDE" application: Minimum 52" wide pair, with neither door being less than 21" wide. "PULL SIDE" application: Minimum 60" wide pair, with neither door being less than 30" wide.
What is the narrowest door a 99 rim, single door can fit on?
The Minimum single door opening should be 26.32" and use the 299 or 499F strike.
What is the minimum stile for Schlage locks?
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width.  See the Schlage Minimum Stile Guidelines  for the minimum stile for each...
What are the minimum door widths for a Senior Swing?
The minimum door widths for mounting a Senior Swing are: Concealed 2810 Series: 2811 single door (offset pivot or butt hinge) -- 33". 2811 single door with stop (center pivot) -- 36". 2853 pa...
What is the minimum door width for a 98/99 Rim device with 4954 mullion?
Minimum door opening for a 98/99 rim device with a 4954 mullion and 299 strike is  26.687" (26 11/16")
What is the minimum door opening width for mounting the 4640 or 4630 on a double door?
The minimum door opening width (for mounting a pair of 4640 or 4630 operators on a double door) is 72" wide (2 - 36" door leaves). Mounting the 4640 or 4630 on a double door that is less than 72" w...