Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ max thickness ives long door pulls ”

Resolution: The minimum door thickness that the AD or CO series lock will mount on is 1 3/8". Be advised that this will require additional spacers to be ordered separately to allow the lock to mount...:

What is the model number for the Ives door edge pull?

Resolution: The sliding door edge pull is part number 230.:

What are the dimensions for mounting a 1261 on the pull side of the door

Resolution: http://lcnclosers.com/pdfs:

What is maximum width, height and weight for IVES butt hinges?

Resolution: Butt hinges can be used on doors up to 4' wide and 200 pounds. There is no maximum door height. However, an additional hinge must be installed every 30" when exceeding a 7' d...:

What is the standard Steelcraft door thickness?

Resolution: 1 3/4" is the standard door thickness. Steelcraft only makes a nominal 1 3/4" thick door. A 1 3/8" was made for light duty commercial applications but that product was discontinued in 1999.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ max thickness ives long door pulls ”

RELATED FAQS