Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ MAX JAMB DEPTH ”

RELATED FAQS

Resolution: Masonry T anchor are approved for fire rated frames up to 3 hours. T Anchors are shipped lose for field installation. Anchor construction: The T portion and the strap do have minimum dim...:

JAMB DEPTH

Resolution: Jamb Width:

Can a Glynn Johnson 90 stop be used with a top jamb mounted 4040?

Resolution: A 4040-18G drop plate will be needed to drop the closer and arm down far enough not to conflict with the GJ 90 series overhead stop.:

Can a 4041 EDA be mounted top jamb?

Resolution: The 40401/4040XP closer with optional EDA arm has to be mounted parallel arm on the push side of the door.:

TOP JAMB

Resolution: Mounting with closer installed on frame face:

JAMB WIDTH

Resolution: Jamb Depth:

How many P & D (Pierce and Dimple) holes are in a frame?

Resolution: The following are quantities of EMA anchors (pierce and dimples) based on range of frame height: Quantity Nominal Frame Height 2 1'...: