Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
magnet wont case
”
RELATED FAQS
Question
Answer
What are Hold Open Closers & Magnets?
Resolution:
Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:
How do I attach extensions to my magnet?
Resolution:
The magnet extensions can be used with both the SEM 7800 and the SEM1900 magnets. To add extensions to the SEM series magnets, you "MUST" start with the 7810-514 coupler kit. The coupler kit pro...:
What is the holding force of a SEM magnet?
Resolution:
The SEM series magnets have a holding force of approximately 35 lbs when installed according to LCN instructions.:
Wiring direct to a magnet coil on 300 series Magforce lock
Resolution:
If using 12 VDC, use the following wire configuration. Tie Red and Black wires together and connect to positive. Tie Blue and Black wires together and connect to negative. If using 24 VDC, use the...: