ma series replacement M lock lever return spring

RELATED FAQS

Question
Answer
See Falcon MA lever assembly below: The spring mechanism (E) returns the lever to horizontal.  The parts are not sold separate, so if the lever sags, the entire lever assembly shoul...
Lever assemblies part numbers are found in the Pricebook.  Note they are handed.
  Issue: One or both levers don't stay horizontal and droop down.   Facts: Falcon T series locks in a high use application.   Cause: Weak or broken springs within t...
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series.  Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...
The old D series lever lock was replaced by the ND lock in September 2003.
The 06-242 (with design and finish) can be used to get a pair of replacement levers for Falcon H2100 series locksets. 
These parts are no longer available.  For reference the spring part number is 4841 and the clip part number is 4326.
There are two ways to replace the outside lever for a Schlage L9000 mortise lock.   Replacing the outside lever only with part number 09-401 is possible, but very difficult....
If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch.