Falcon began offering an RX switch with its electrified functions beginning January 17th 2012. To specify, add "RX" to the end of the part number.
Example: Storeroom Function, Fail Safe (EL), 12...
The MA RX features independent switches within the chassis that allow the customer to choose whether to monitor the inside or outside knob/lever.
Each switch is pre-wired to work with either normally open or normally closed systems, with color coded 5 ft long leads.
Schlage now offers modular style cams to operate the Falcon MA locks.
The following part numbers are cams for all MA locks (except the MA381):
L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Here are some of the major differences between the M and MA-Series.
Lever mounting post holes - Locations have changed on door template. (12 and 6 o'clock for M lock, MA lock is approx 1 and...
The MA lock is field reversible. The process involves three potential steps depending on what hand is needed.
Rotating latchbolt - Changes swing of lock. ex (RH to RHR) or inswing vs outswing
...
See Falcon MA lever assembly below:
The spring mechanism (E) returns the lever to horizontal. The parts are not sold separate, so if the lever sags, the entire lever assembly shoul...
Lever assemblies part numbers are found in the Pricebook. Note they are handed.
To remove the M lock trim follow the steps below in reverse.
The M lock spanner wrench is 021415. Although this wrench is no longer available from&n...