Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LX FUNCTION WITH CHEXIT ”

Resolution: A thumbpiece, knob or lever trim left in the unlock position would be locked when the Chexit is armed and unlock when the Chexit device is disarmed. To keep the outside trim in the lock p...:

What does BOCA mean for the Von Duprin Chexit device?

Resolution: The Von Duprin Chexit-BOCA has special software. Following is the function of this software: When Chexit device push bar is pushed and goes into alarm it will release in 15/30 sec...:

Can the Von Duprin Chexit device be ordered with LX latch bolt monitor?

Resolution: The LX switch is not available with Von Duprin rim and vertical rod Chexit devices. If using a mortise Chexit device the SS7500 mortise lock would provide a LX latch bolt monito...:

Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

Can the Chexit 98/99 be used with the E996 lever trim?

Resolution: You can use the E996L electric trim with Chexit 98/99 series exit device.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LX FUNCTION WITH CHEXIT ”

RELATED FAQS