Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Lock is getting hot ”

RELATED FAQS

Resolution: Thermal Bow is a temporary condition which occurs in metal doors mainly due to the temperature differential from one side of the door to the other. This may occur in exterior doors when direct sun ...:

Where can I find discontinued G lock templates?

Resolution: Schlage G Series template locate here. :

Why is my E996L solenoid getting hot?

Resolution: This is usually an indicator of applying excessive voltage. Measure the voltage going into the solenoid and make sure you have 24-26.4VDC cross the two wires going into the solenoid. Also measure ...:

Should a solenoid be hot to the touch?

Resolution: If there is concern that the solenoid or device is "too hot" or has the capability to cause injury, disconnect the device and contact a authorized service representative to analyze the opening.:

Why would an EL 98/99 solenoid get hot?

Resolution: If voltage going into the solenoid is much higher than 24VDC it could cause the solenoid to get hot. Check the power supply output voltage to confirm. If the holding coil on EL solenoid is shor...:

How hot do the 6000 electric strikes get?

Resolution: If the solenoid of the 6000 series electric strike is powered continuously with proper voltage at room temperature, the solenoid can feel very warm to the touch. Ensure the power supply ...: