Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
LFIC construction core part number
”
RELATED FAQS
Question
Answer
What is the part number for T lock tailpiece used with a conventional cylinder?
Resolution:
The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Refer to Table 1 for a list of T lock tailpieces for conventional cylinders. Table 2 show...:
Will Schlage make a cylinder in another vendors keyway?
Resolution:
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...:
What is the part number for a control pin for a 23-030?
Resolution:
There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:
How to order the mortise full size interchangeable core with a construction core.
Resolution:
This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:
What is the part number for a full size construction control key?
Resolution:
The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...: