Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LEVER TRIM ASSEMBLY ”

Resolution: The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch. To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...:

Von Duprin 230L Trim Redesign

Resolution: As previously announced, Von Duprin 230L trim used with the 22 series device has been redesigned with modifications to the lever assembly. - Complete Marketing ...:

What parts of the device and trim for the 98/99 are 643E finish?

Resolution: Device: Pushbar end caps, pushbar trim and center case cover. Trim: Lever assembly, trim plate assembly (trim plate and bushing sleeve).Bronze Finish Comparison:

How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?

Resolution: To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...:

Can the Schlage danmark levers be added to the 996?

Resolution: The Schlage Danmark levers are not available on the Von Duprin 996L lever trim.:

Does Falcon have a breakaway lever trim feature on mortise locks?

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:

Can you order the Schlage L series mortise lock with knob on one side and lever on the other?

Resolution: Includes the SL1 lever on one side and the SK1 knob trim on the other side.:

Can danmark lever designs be used on Von Duprin Exit Device trims?

Resolution: Von Duprin does not offer any of the danmark lever designs by Schlage.:

Why does my 7500 retract the latch bolt but not re-lock the trim?

Resolution: Tips for changing the function: The NL Drive screw will not be visible when lock body is set to Classroom function There is locktite on the screw that makes it seem like its turned down enou...:

What is the difference between Von Duprin EL and E functions?

Resolution: Application is based on how the door will be used. Please contact Product Support at 877-671-7011 to discuss your application and select the correct device for your opening.:

Can we still supply the 812 L trim for the Monarch 18?

Resolution: Allegion stopped manufacturing he 812L trims when the Falcon/Monarch XX Series crossbar devices were discontinued in 2019.The 812L trims had also been used on the Monarch 18 Series pushpad devices ...:

Does Von Duprin make a keypad lever trim?

Resolution: Von Duprin used to offer a KP992L trim that was operating the 98/99 series exit devices but it was discontinued in mid 1990. Von Duprin does not make a keypad trim any longer.:

Does Von Duprin offer any pulls that through bolt to the Guard-X device?

Resolution: Von Duprin does not offer any lever trim or pulls that through bolt to the Guard X device. Ives has the 8102-6 and 8105-6 pulls that can be lined up with the mounting screws of the exit device b...:

What is the part number for the outside trim assembly on L9000 mortise locks?

Resolution: Outside Knob/Lever and Rose/Escutcheon Assemblies Part Number Description A Rose with Knob/Lever 09-506 Designs: 01 02 03 05 06 07 12 17 18 OME 41 42 09-655 Des...:

How do I change the function of the Von Duprin 7500 mortise lock from Lever ( classroom ) to NL ( night latch )?

Resolution: To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...:

Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?

Resolution: - AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device. Be sure this screw is installed- Exit hardware and strike must be properly mounted ...:

Do we make a blank trim plate to replace an existing trim?

Resolution: We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:

Can the Chexit 98/99 be used with the E996 lever trim?

Resolution: You can use the E996L electric trim with Chexit 98/99 series exit device.:

What is the part number for the lever return spring for an old 182LE trim?

Resolution: These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:

Can you use lever trim on a 19V-EO without getting any additional parts?

Resolution: The Exit Only (EO) device will accept any 19 Series trim as the main cam for the trim input is always put on the device center case.:

How does the 98-2 or 99-2 double cylinder function affect the outside lever trim?

Resolution: Double cylinder (-2 or -2SI) features an inside key cylinder which locks or unlocks the outside trim and an outside key cylinder which retracts the latch bolt only (Night latch function). Thi...:

Can you get Avalon lever for 25 series lever trim?

Resolution: See 24 and 25 series trim section in the Price Book.:

Are the danmark levers available in escutcheon trim?

Resolution: The Danmark levers were available in rose trim only.:

Are lever trims available for DOM devices?

Resolution: The only Falcon Doromatic device with a lever trim option trim is the 1790 device.:

Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?

Resolution: The Von Duprin 994L series trims were square on top and bottom. They were discontinued in July 2010.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LEVER TRIM ASSEMBLY ”

RELATED FAQS