Lever return rule for California

RELATED FAQS

Question
Answer
This is in regards to the California State Reference Code, (Formerly Title 19, California State Fire Marshal Standard) stating that all levers with returns comply; levers must return to within 1/2"...
As long as there is no door position switch involved the outside trim will work as it would on a standard 98/9975 device. 
See dimensions for LAT and LON levers from the L9000 series
The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4".
  Issue: One or both levers don't stay horizontal and droop down.   Facts: Falcon T series locks in a high use application.   Cause: Weak or broken springs within t...
See Falcon MA lever assembly below: The spring mechanism (E) returns the lever to horizontal.  The parts are not sold separate, so if the lever sags, the entire lever assembly shoul...
Lever assemblies part numbers are found in the Pricebook.  Note they are handed.
These parts are no longer available.  For reference the spring part number is 4841 and the clip part number is 4326.