left or right?

RELATED FAQS

Question
Answer
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...
Look to see if the  "Fail Safe?UNLOCK" on communication failure is set and you have lost communication.
The "Unlock on READ" from diagnostics will clear with the next AD400 heartbeat, automatically. It will also clear with successful communication to a working access control panel. 
 If the AD-400/AD-401 is LINKED to a PIM400-TD2 and all credentials including invalid cards are granted access, the PIM400-TD2 is not communicating with the Access Control Panel, and the lock is st...
Or force a strike input to the PIM400-TD2. Short J8-1 and J8-2 (Door 1), Short J7-1 and J7-2 (Door 2) on the PIM400-TD2
A  LHR (left hand reverse) door uses a RH (right hand) door closer. A RHR (right hand reverse) door uses a LH (left hand) door closer.
A door can be handed in several ways. The easiest way is to stand on the Push side of the door. Push the door away from you as if you are going to walk thru the opening. If the hinges are on yo...
To determine the hand of a door, view the door from the outside, security side or key side of door.  Once there identify which side are the hinges located on the, right or left side of t...
Go to the push side of the door opening.  See above illustration. If door swings out to the left, it needs a left hand door closer. If door swings out to the right, i...
LHR