Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
lead time steelcraft
”
RELATED FAQS
Question
Answer
What is the part number for the 88 series dogging screw?
Resolution:
The part number for 88 series dogging screw is 090004 (package of two) and 090083(package of ten).:
Is lead lining a GJ overhead an option or even needed when used in an X-ray room?
Resolution:
Lead lining is not needed, since the channel or through bolt is solid and the x-rays will not penetrate the solid metal.:
Can steel frames be installed after the wall board is installed in stud wall applications?
Resolution:
DW and K-Series frames are designed to slip onto a stud wall after the wall is finished (painted, wall papered, etc).Walls can be either wood stud or steel studUsed only for interior appl...:
What is ASTM E-119?
Resolution:
ASTM E-119 is a test standard for walls, partitions and floor or roof systems: This test standard is also used for ceramic type glasses when used as window wall and/or borrowed light frames.As...:
What is the backset for the Von Duprin WS9827 device when installed on Steelcraft Paladin series door?
Resolution:
The backset is 2 3/4" from edge of door to the center line of the device and strike. The preparation for the WS98/99 strike must be specified when placing order for the frame. :