Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
lead line cover for lcn
”
RELATED FAQS
Question
Answer
Is lead lining a GJ overhead an option or even needed when used in an X-ray room?
Resolution:
Lead lining is not needed, since the channel or through bolt is solid and the x-rays will not penetrate the solid metal.:
Are LCN metal covers a ferrous or non ferrous Material?
Resolution:
All LCN metal covers are steel which is a Ferrous material. FerrousThese are metals which contain iron. They may have small amounts of other metals or other elements added, to give the ...:
What is a 62A shoe used for?
Resolution:
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.:
Which Falcon SC closer is the closest match to a LCN 4040?
Resolution:
The Falcon SC 71:
Does the door prep need to be altered when ordering the L9000 locks lead lined?
Resolution:
The door template L1 states: "Lead Lining: When L9000-Series or L400-Series locks are ordered with lead lining, add 1/8" to the width of the mortise cut-out on the lock case cover side of installa...:
Are Lead Lined covers needed for LCN Closers?
Resolution:
The determination was made that Lead Lined covers are no longer needed for the LCN product line, see below Marketing/EHS document. Lead Lined cover discontinuation letter :