Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ LCN THRU BOLT closer ”

RELATED FAQS

Resolution: The standard screw pack for most LCN closer is the SRT (Self Reaming and Tapping) screw. Thru bolts are an option but must be specified on the order. There is no charge for them, but they...:

What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?

Resolution: A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.:

What is the thread size on LCN thru bolts?

Resolution: The LCN Thru bolts accept 1/4-20 thread. LCN thru bolts are made of steel with zinc plating.:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

How do you adjust a door closer?

Resolution: How to: What are the steps to adjust a door closer? Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All closers with a "Del...:

What LCN closers are available in a tri-pack mounting?

Resolution: The 4040XP, 1260/1261, 1460/1461, 4030/4031 closers have the tri-pack mounting option when ordered with an Rw/PA or Hw/PA designation.:

Can LCN closers be installed outside in the elements?

Resolution: The LCN closers are not designed nor intended to be exterior mounted in the elements. :