Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn srt screw size ”

Resolution: The LCN Thru bolts accept 1/4-20 thread. LCN thru bolts are made of steel with zinc plating.:

What size machine screws are used with thru bolts and a 2-3/4" thick door and a 4040 closer?

Resolution: A 4040 closer mounted with thru bolts on a 2-3/4" thick door would require 1/4-20 X 3-1/2" machine screws.:

What are the SRT screws lengths used with LCN Closers?

Resolution: SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified. There are 3 standard lengths of SRT screws:1-3/...:

What is the part number for the 1460 cylinder mounting bracket?

Resolution: The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack. Please note it used to be shipped loos...:

Does LCN have Torx head wood screws?

Resolution: Torx head screws are only available as machine screws.:

Do I need to order the LCN 4040XP closer X ST-3596 to get the cover screw to secure the snap on cover to the cylinder?

Resolution: As of June 27th, 2018--- the cover screw is now standard in the screw packs for the 4040XP, 4040XPT, 4000T, and 4040SE so ST-3596 is no longer needed. :

What wire gauge is recommended for LCN hardwired actuators?

Resolution: LCN recommends an 18 AWG (minimum) wire size (gauge) to the 8310 Series hardwired actuators.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn srt screw size ”

RELATED FAQS