lcn quick ship

RELATED FAQS

Question
Answer
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
Allegion order status and tracking information is only available to Authorized Distributor Partners.   Authorized Allegion Distributor Partners can view order forms and ordering information ...
FastTrack is a quick ship stock program which includes targeted Builders Hardware SKUs offered by Allegion Distributor Partners. FastTrack order forms and supporting information is available only t...
Allegion Employees can access the distributors’ “My Allegion Portal” thru The Frontline Home Page: Click on “My Allegion Distributor Portal” located in the navigation menu on the left si...
LCN does not supply Allen wrenches, the size that LCN uses, are standard sizes that every installer will have in their tool kit. 3/32" Allen wrench for adjusting regulation valves: main speed, lat...
Use the cylinder suffix 'T' for full size interchangeable core or the cylinder suffix 'HD' for small format interchangeable core, see Figure 1.  Small format also has a disposable core option ...
The standard backset for the Falcon B Series is 2-3/4".  A 2-3/8" backset is also available if specified.
Window kits are available for Steelcraft doors as either factory installed or prepared and installed by a distributor. Factory prepared light cutouts are supplied with Dezigner trim as st...
The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.
On May 1, 2013 the LM9000 lock was discontinued and replaced with the LM9300 Multipoint Lock. 
The LM9000 mortise lock, door with pre-assembled vertical rods, and frame all ship separately.  The soffit latch, bottom strike, and latch release will ship with the mortise lock, not the...