Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn corner bracket ”

RELATED FAQS

Resolution: ST reference document found here.Part number for the MS screws only is MS x ½” x Finish (individual screws) or MS/4 x ½” x Finish (pack of 4 screwsFor current ST pricing and templates please contac...:

What special template (ST) is used with a 5030 closer and a GJ100 with offset pivots/butt hinges?

Resolution: A special template (ST) is no longer required for the GJ100. Special template ST-9401 (from GJ) was the old nomenclature for the special jamb bracket.The CJ bracket is required when using a GJ-Ives...:

Are there special brackets needed when using the 4110 series with a coordinator?

Resolution: When using the 4111 with a bar style coordinator MB-mounting brackets ordered from IVES are required. The brackets wrap around the coordinator to provide a surface for mounting the parallel arm ...:

What is the part number for the 1460 cylinder mounting bracket?

Resolution: The part number for the 1460 cylinder mounting bracket is: 1460-30A.At the end of August 2016, this mounting bracket is packed in the closer Screw Pack. Please note it used to be shipped loos...:

Are LCN -16 and -17 corner brackets still available for purchase?

Resolution: The LCN -16 and -17 corner brackets are obsolete and no longer available from LCN.:

What can I use instead of the EDA with 145 shoe?

Resolution: The 419 panel adaptor is the replacement for both the obsolete 145 shoe, and 418 panel bracket (both were made obsolete in 2009). The 419 panel adaptor is 4" wide, 2" tall, and projects 3". ST-069...: