Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn closing force ”

Resolution: The size 6 handed closers will have the most (strongest) closing force. The 4016 (pull side), the 4026 (top jamb push side) or the 4116 (push side parallel arm) have the highest closing force.:

How do you adjust a door closer?

Resolution: How to: What are the steps to adjust a door closer? Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All cl...:

In what direction should the hold open nut be pointing for a 4041 H closer, up or down?

Resolution: Make sure that the hold open nut is not on upside down. The orientation of the hold open nut depends on the mounting. On a Top Jamb "Push Side" mount, the hold open nut would poi...:

CLOSING FORCE

Resolution: Force, Spring, Spring Size, Closer Size:

What is power boost on a Senior Swing or Benchmark operator?

Resolution: Power Boost is a positive latching feature that increases the latch force, to over come building stack pressure or door weather stripping, etc, if the door stops before co...:

Can a magnet, or sentronic device, be released and close the door from a button at a desk?

Resolution: If a door is being held open by the LCN SEM 7800/1900 magnet or any ME/SE Series Sentronic LCN closer, you can remotely release that door to close by ordering the following parts and wiri...:

What is the holding force of a SEM magnet?

Resolution: The SEM series magnets have a holding force of approximately 35 lbs when installed according to LCN instructions.:

SPRING POWER

Resolution: Closing force exerted by the spring inside the cylinder to close the door:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn closing force ”

RELATED FAQS