Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn closers corrosive environment? ”

Resolution: The 4040XP, 1260/1261, 1460/1461, 4030/4031 closers have the tri-pack mounting option when ordered with an Rw/PA or Hw/PA designation.:

Can I mount an LCN Cush closer with an GJ overhead stop?

Resolution: It would be unnecessary to use the CNS/Cush arm and the Glynn Johnson overhead devices in the same application, both mechanisms stop the door.:

What finishes should be used on exit devices near the ocean or in saltwater environments?

Resolution: Von Duprin Exit Devices (33A/35A, 98/99, etc) are handled on a case by case basis regarding their ability to handle salt and chemical environments. Our powder coated finishes US28 (Anodized Alum...:

What arm can I use for the old LCN 4030/4130 closer?

Resolution: The old 4030/4130 closers and arms are obsolete, there is nothing to replace them. No arm from other closers will fit There is no closer that can replace the old 4030 series closer with the exa...:

How do you adjust a door closer?

Resolution: How to: What are the steps to adjust a door closer? Facts: All LCN and FALCON door closers will have 3 regulating valves and a spring adjustment. All closers with a "Del...:

Does LCN sell a coupler to stack two 4040XP closers together?

Resolution: LCN does not recommend this type of installation, and has never sold a coupler to do this.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ lcn closers corrosive environment? ”

RELATED FAQS