Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ large format ic core control key? ”

Resolution: Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

Is a standard cylinder keyway such as "C" available in SFIC?

Resolution: It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:

How are interchangeable cores installed?

Resolution: A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...:

What is the part number for a full size construction control key?

Resolution: The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ large format ic core control key? ”

RELATED FAQS