Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
l steel control key
”
RELATED FAQS
Question
Answer
Why do the mounting studs on the 379L not line up with the back of the 55 rim?
Resolution:
The existing 373L control was modified and re-named as 379L to allow us to use the 55 rim device on an ADA door opening. The 379L control is our 373L with different hex st...:
Can the Schlage L or LP section key blank be cut in the field?
Resolution:
Schlage does not recommend cutting the L or LP section key blanks in the field. Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...:
Why is a bituminous back-coating used?
Resolution:
Some architectural specifications require steel frames to be back-coated with a bituminous coating for corrosion protection or sound control. It is commonly specified to be used in condit...:
Key Management
Resolution:
Much like the key control of masterkeyed codes in a mechanical key system, key management in an electronic system is the process of controlling badge IDs, facility codes, and ensuring the security ...:
Does Steelcraft offer the doors and frames galvanized or galvannealed?
Resolution:
Yes, Steelcraft does offer optional A60 and A40 Galvannealed, and G90 Galvanized steel on doors and frames. Galvannealed A60 and A40: A60 coating designation - optional on all doors and frame...:
How are interchangeable cores installed?
Resolution:
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...:
What is the part number for a full size construction control key?
Resolution:
The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...:
What is the part number for a full size interchangeable core control key?
Resolution:
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...: