Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Keying Kit Part Numbers
”
RELATED FAQS
Question
Answer
What is the part number for a cut emergency key in a C keyway?
Resolution:
The part number is 48-102 C, you will need to specify the cuts.:
Does Schlage offer a rabbetted latch and strike kit?
Resolution:
Schlage does offer rabbetted latch and strike kit: Part number, 39-030, for cylindrical locks and deadbolts. Part number, 10-075, for the L9000 mortise locks. Monarch does not offer rabbette...:
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
Resolution:
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:
What is the part number for the dogging assembly for a 1690/1790/2390?
Resolution:
For any device made after 2001, the part number for the Falcon 1690 dogging kit would be KIT.1197 For devices made prior 2001, the dogging kit is no longer available and a new device must be ...:
What is the part number for the EAK PCB only for Monarch Falcon devices?
Resolution:
This circuit board will NOT work on the updated 24/25 Alarm Kits that released June 11th, 2012.:
Is there a Schlage modular cylinder sales kit?
Resolution:
Schlage has released a modular cylinder sales kit, part number 40-224. It's contents and information can be found here.:
What back plate conversion kit is required for the 88 with the 373L trim?
Resolution:
Attached tables provide the back plate conversion kit for all 88 series Exit devices. 88 Back plate conversion Chart :
Is the Falcon 1390 exit device dogging kit (4270106669) still available?
Resolution:
The Falcon 1390 exit device is discontinued and parts are no longer available from the factory. New England Door Closer may still have some older kits and can be contact...:
Can the Schlage L or LP section key blank be cut in the field?
Resolution:
Schlage does not recommend cutting the L or LP section key blanks in the field. Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...:
What is the part number for a horn on the Chexit?
Resolution:
If the horn fail to operate in the CX device you need to replace the Chexit module. 040086 is the part number for devices shipped after 8-24-2015 with motor driven.050228 is the...:
I have an ILCO key what is the Schlage equivalent?
Resolution:
The table below provides the Ilco cross reference to the Schlage keys. Ilco IdentificationSectionPinsSchlage Part #SC1C535-100 CSC4C635-101 CSC6 waferN/ASC7F535-100 FSC8E5...:
What is the part number for the 99L to 99L-2 kit?
Resolution:
Format for ordering double cylinder (-2) and double cylinder with security indicator (-2si)(device) (fire rated)(-2 or -2si)(conversion kit)(finish)(handing) Examples:98/9927-F-2-Conversion Ki...:
Will Schlage make a cylinder in another vendors keyway?
Resolution:
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB =...:
What is the part number for a full size interchangeable core control key?
Resolution:
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...: