Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Ives door silencers? ”

RELATED FAQS

Resolution: All the templates can be found at us.allegion.com Please click here :

What is the part number for the rubber tip for an Ives hinge pin door stop?

Resolution: Model 69 the part number is 09-310Model 70 & 73, the part number is WSPART.1075:

What is the difference between the Ives 482B and the 482A door guards?

Resolution: The difference between the Brass version 482B and the Aluminum version 482A is the size and design as well as the base material and available accessories. The Brass version 482B comes w...:

What is maximum width, height and weight for IVES butt hinges?

Resolution: Butt hinges can be used on doors up to 4' wide and 200 pounds. There is no maximum door height. However, an additional hinge must be installed every 30" when exceeding a 7' d...:

Does Ives offer a continuous hinge or pivot for lead lined doors?

Resolution: Ives does not offer a continuous hinge designed specifically for lead lined doors. Standard hinges may work if the hinge and mounting hardware do not penetrate the lead lining in the door.&nb...:

Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?

Resolution: Ives SB360 surface bolt at top and bottom are the only flush bolts approved for use on H-Series hurricane FBC or NOA applications? The only approved latching hardware for inactive leaf of pairs w...:

What is the model number for the Ives door edge pull?

Resolution: The sliding door edge pull is part number 230.: