Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ installing schlage rim cylinder ”

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What is the length of a Schlage rim cylinder?

Resolution: The Schlage rim cylinder lengths are given below and were measured from the face of the cylinder to the back of the tailpiece. Because of allowable tolerances for each part the average length is l...:

What is the part number for the Schlage small format rim cylinder tailpiece?

Resolution: B502-899 is the tailpiece for both the SFIC and standard rim cylinders.:

Which way is the tail piece of the rim cylinder is inserting into the Von Duprin 98/99 rim device from 996L trim?

Resolution: The tailpiece of the rim cylinder can be inserted into the Von Duprin 98/99 rim device either vertical or horizontal (using the tailpiece guide).:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ installing schlage rim cylinder ”

RELATED FAQS