Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Installation for RX switch in rim exit device ”

Resolution: Position the 379L trim and attach with countersunk screw into the bottom stud of the trim. Position the 55 Rim device and attach with the device mounting screw through the head of the de...:

What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?

Resolution: The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed.:

Can the Von Duprin RX Switch be installed on an existing Falcon Monarch 19?

Resolution: The devices baseplates/scissor assemblies are different and will not accept the Von Duprin RX switch.:

Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?

Resolution: This can be done ONLY with non fire rated exit devices.:

Is the Von Duprin 1609 strike fire rated for pairs of doors?

Resolution: The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...:

Do we make a blank trim plate to replace an existing trim?

Resolution: We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Installation for RX switch in rim exit device ”

RELATED FAQS