Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Install instructions rim exit device ”

Resolution: Position the 379L trim and attach with countersunk screw into the bottom stud of the trim. Position the 55 Rim device and attach with the device mounting screw through the head of the de...:

Do we make a blank trim plate to replace an existing trim?

Resolution: We have several blank trims listed in the price book to cover existing trim prep in door. DEVICE EO TRIM 22 230EO 88 880EO 98/99 990EO or 996EO* 33A/35A Rim, 33/3...:

Why would the 996L trim not lock or unlock when installed with 98 or 99EO?

Resolution: The 98/99 rim and vertical rod exit devices are shipped with NL drive screw to function as a Night Latch. To convert the device to Class Room, remove the NL Drive Screw on 98/99 center case ass...:

How do you change the Von Duprin 990TP trim to NL function?

Resolution: Recommend to order a new 990NL-R/V or M trim to change from TP/Classroom function to NL/Storeroom function. You will also need to reinstall the NL drive screw back into into the mast...:

Is the Von Duprin 1609 strike fire rated for pairs of doors?

Resolution: The Von Duprin 1609 cannot be used on a pair of fire rated doors. We recommend using the Von Duprin fire rated mortise exit device in lieu of the rim device such as the Von Duprin 5575-F,...:

Can a Von Duprin 996L trim be converted to M996L trim?

Resolution: An M996 conversion kit is required to convert the 996L/L-BE trim to an M996L/L-BE electrified trim.47273111: 996 R/V/C Conversion to M996 Motorized Kit - for 996L rim or vertical rod exit dev...:

How does the Von Duprin 98/99 rim or vertical rod exit device with lever trim convert from L to L-NL function?

Resolution: To convert the Von Duprin 98/99 Rim or Vertical (Rod or Cable) Exit Device with functional lever (996L-R/V) to act like a rigid lever (996L-NL-R/V) with key over ride follow these steps: R...:

What is SLM blocking and how does it effect exit device installation?

Resolution: SLM - special laminated material - blocking is put into the wood doors so there is material to mount the exit device using wood screws.:

Do we have instructions on how to clean an exit device?

Resolution: Recommendation is to use mild soap with a damp cloth to clean an exit device.:

Where do I install my Auxiliary Fire Latch (AFL) in a Less Bottom Rod, Fire Rated (LBR-F) exit device?

Resolution: Installation should be 6" from bottom of the door. See attached templates as reference. T-5494 for HM Doors W-5494 for Wood Doors:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Install instructions rim exit device ”

RELATED FAQS